![]() ![]() Keep a wet rag handy to clean up any spills or excess Log Jam.This will greatly aid adhesion of the chinking to the log. Tool Log Jam with a wet foam paint brush to help ensure good contact between the chinking and the log surface.Mist Log Jam with a light water spray prior to finish tooling.The ideal Log Jam chinking thickness should be no less than 1/4 inch and no more than 1/2 inch.Apply Log Jam using a chink pump, a bulk loading gun, or a large caulking gun.Using these techniques will provide a bond breaker that allows the chinking to stretch as the logs move. When chinking flat logs with a milled in chinking line, use a quality masking tape centered in the milled groove. When chinking round logs we recommend using Grip Strip Backer Rod that has been securely stapled or nailed into place. It is always best to use a bond breaker when prepping the log surface for Log Jam application.Log Jam is best-applied in moderate weather conditions, i.e., out of direct sunlight, and in dry, warm conditions. The surface temperature should be between 40˚F (4˚C) – 90˚F (32˚C). Clean the log surfaces thoroughly to remove dirt, pollen, bird droppings and other surface contaminants.Best results are obtained when Log Jam is applied to wood that has been previously coated with a compatible and thoroughly cured stain.LOG JAM CHINKING SURFACE PREPARATION GUIDELINES Sealant Calculator PRODUCT FACTS FOR LOG JAM LOG CHINKING SHELF LIFEĬompatibility: Log Jam will adhere to wood treated with most preservatives including borates, pentachlorophenol and copper compounds. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |